By Scribe

Discipline Technologies recently opened a prison for clients and volunteers seeking incarceration for themselves or others (see our publication Long Term Confinement Part- 01). We quickly realized that we had facilities and personnel that were not being used to full advantage. Our warehouse had a large first floor and shipping facilities that were mostly unused. Our basement was full of prisoners that were sitting idle in their cells. We thought if we could productively employ these prisoners plus obtain additional slaves, we could achieve a win/win for our clients and our company.

We first contacted the clients who consigned inmates to us for safekeeping. We offered to waive the fee for confinement if we could use the prisoner as a slave. A few clients wanted to keep their victims chained in their cages. The majority, however, were happy to save the expense of confinement and let us use the prisoner as we saw fit. We then asked the volunteer prisoners if they wanted to continue to be locked in their cell or work as a slave in the warehouse upstairs. Tired of solitary confinement, most elected in get out of their cages. A few preferred to continue their incarceration.

We realized we needed more slaves than just the prisoners in the basement. We contacted several slave traders. We offered to take their slaves that were deemed untrainable or were rejected by their buyers. We agreed to share a portion of the profit their slaves produced. We received an enthusiastic response as disposition of these slaves can be difficult. We, of course, continue to accept volunteer commitments from individuals who want to experience life as a slave.

Once we were assured of adequate slave power, we contacted manufacturers who need assembly work done on their products. Due to our low labor costs, Discipline Technologies was able to competitively bid to get all the work we could handle.

We then started to design our systems to manage and control the slaves. We constructed an oval with the work stations on one long side and the sleeping area on the other side. Feeding, toilet and shower facilities were built on the short ends of the oval.

The slaves will wear two specially designed pieces of equipment plus leg irons. The first restraint is a chastity belt and the second is a hood or helmet. The chastity belt does more than just keep the slave from expending unnecessary energy jacking off. We instead call it a control belt. The belt will deliver painful socks if the slave leaves the work/sleep oval. The further from the oval the slave moves, the more powerful the shock until it is left writhing on the ground. This makes escape virtually impossible.

The helmet has a hard shell on the outside and ample rubber padding on the inside. There is a detachable hollow rubber gag. Since there is never a need for the slave to speak, the gag is permanently inserted except for feeding times. The helmet has a ratchet at its base which tightens the lower jaw around the gag. This makes it impossible for the slave to engage in any intelligible conversation. Slaves are instructed to grunt once for yes and twice for no when asked a question. Since all the helmets look the same, slaves are identified by a number on their helmet and control belt. Slaves are always addressed by their number. Any past name and history are erased once the slave enters the system.

The helmet has speakers in the ears to continuously play white noise. The guards or supervisors can interrupt the static to give instructions to the slave. The inability to speak or hear other slaves provides an additional level of security preventing any organized mutinous activity.

The helmet has a no eye holes but rather a virtual reality screen on the inside and a camera on the outside. We can constantly control what the slave sees. When the slave is working, it can clearly view what it needs to do. When there is a new task, we can show training videos. When it looks away, VR software blurs any other slave’s number or guard’s face maintaining everyone’s anonymity and further preventing any communication. At night, the VR screen goes dark, letting the slave enjoy restful sleep.

The leg irons are electromagnetic. There is a short connecting chain so that the slave can shuffle to the next station. The magnets are turned on to anchor the slave to a magnet in a chair, bed or post while working, sleeping, showering, eating or on the toilet. They are turned off when the slave needs to move to another station.

The slaves sleep on padded benches. The electromagnetic irons secure its feet while the guard secures its wrists to the side of the bench. An induction charger built into the bench recharges the helmet and control belt while the slave sleeps. The helmet and belt are removed and cleaned twice weekly during the slave’s shower while the leg irons and handcuffs keep the slave in place. At the feeding station, gags are removed, and the slave is given water and a tasteless protein drink. Slaves are instructed not to speak when the gag or helmet is removed. If it talks, the gag is re-applied and the slave goes hungry.

Slaves work 7 days a week, 10 hours per day, one 5-hour shift in the morning, another 5-hour shift in the afternoon. Quotas are established for each assembly product. The VR screen shows the count as each item is completed. The helmet reports the total number of products correctly assembled each day to the supervisor. The slave is rewarded if it exceeds the quota and punished if it falls short. If the slave exceeds its quota by 10% or more, it receives better food at the next meal. If the slave exceeds its quota by 20%, it can jack off in the shower while the control belt is off. We find these rewards are real motivators.

For minor infractions, the control belt is used. The guards or supervisors can shock the slave by pressing a button on their remote. They can also adjust the intensity of the shock. This usually corrects the behavior. The chastity cage in the control belt has an electrified urethral tube. The cap of the cage and the tube is spring loaded. This keeps the electrode always firmly on the head of the cock even when flaccid, delivering a painful shock to the misbehaving slave’s most sensitive area.

Unfortunately, there are always slaves who seriously shirk their duties. Punishments are progressive. There is a St. Andrews cross in the sleep area. The offending slave is locked on the cross and given 25 single tail strokes for the first time it fails its quota. The second offensive is punished by 50 strokes. The VR screens for the other slaves are turned on to witness the punishment and motivate them to continue to meet their obligations. The ear buds are turned on so the slaves can hear the gagged screams of the victim.

Slaves who continue to be uncooperative receive more severe punishment. The slave is raised up on its toes by wrist manacles and chains connected to a ceiling winch. Allegator clamps and heavy weights are attached to the slave’s tits. The control belt is then activated to deliver random painful shocks to the slave’s dickhead and balls. The shocks cause the slave to writhe painfully pulling on its extended arms and shoulders. The movement causes the tit clamps and weights to swing increasing the slave’s torment. The frequency and intensity of the shocks is randomized so that the slave never knows when the next jolt is coming. The slave is disciplined for four hours for his third offense. The fourth infraction requires eight hours of correction. The other slaves have to listen to its gagged screams and moans the entire night.

Unfortunately, some slaves are unwilling or unable to produce even after several punishments. These slaves are returned to their owners or slave traders. Most of the time, however, their owners don’t want them back. We send them to the basement solitary confinement cells. Volunteer and consigned slaves and prisoners are also returned to the dark lower-level cages until their release date. A slave who was especially lazy or troublesome will find itself loaded with heavy irons and chains in addition to a spiked collar and chastity. The guard may be instructed to piss into its daily allowance of oatmeal. We may even leave its control belt on for a while, set to punishment mode.

There is no need for the slave to continue to wear the sophisticated slave helmet while in the basement cages. However, we have steel hoods for prisoners or slaves locked in the solitary confinement cells. These hoods lock on to the slave’s head and neck completely encasing it in metal except for a small hole for feeding and breathing. The slave’s identity is immediately hidden. Its face will never be seen again. We don’t even bother to remember the slave’s number.

We believe the slave helmet and control belt developed for our working slaves will have a wider appeal to our other customers. Prisons can control what their inmates see and hear with our helmet while keeping the prisoner gagged and silent. Gang interactions and drug deals become impossible since the prisoners are unable to speak or hear. The blurred facial images with the VR software will improve the safety and anonymity of prison staff and other inmates.

The control belt can be fitted with GPS software. The prison administrator will always know where the inmate is located. Escapes can be eliminated by programming perimeters beyond which the inmate can’t travel.  The prisoner can even be contained in a cell without walls. The GPS can be set to keep the inmate in an 8-by-8-foot square. Discipline for unruly prisoners can be delivered via shock with the touch of a button.

Thank you for your interest. Whether you are a master, slave trader, prison administrator or masochist seeking slave employment or imprisonment, Discipline Technologies can meet your needs for confinement, control, punishment and discipline. Inquiries from manufacturers needing inexpensive assembly work are also welcomed.

Click for next part

Click for previous part

Click to start at Part 1