Tag Archives: chuck

Chuck’s Cup Jock Chastity

Speaking of cup jock chastity, check out the pictures and information that Chuck sent a while back:

Chuck_01

 

Chuck writes:

I was recently inspired by Metalbond’s post about using a cup to begin chastity training. So I wanted to show how a cup can also be used for REAL chastity.

Here’s a leather chastity belt I got from Worn Out West in The Castro. It works pretty well on its own, but by inserting a plastic cup (Like the one Metal suggested) into the pouch, it works perfectly … you are not able to touch ANY of your junk.

I wish I could wear this belt 24/7, but being leather, it’s not good to get it wet. Also, there’s no provision for when you need to go to the loo.

But here are a few pics to show how a cup makes a good belt better … even perfect for overnight and that morning wood, shall we say:

Chuck_02 Chuck_03

Here’s the chastity belt, the cup, and two combination locks, all needed for the restraint.

Chuck_04

The cup sneaks in, ready to do its dirty work.

Getting everything in place here. Everything!

There it is, all good and tight. Now what were those combinations again?

There we are, all tucked in for the night. And I have tried hard, it will not come off. The belt fits just above my pelvis, and it won’t drop down when it’s strapped on and locked.

This thing is so comfy… I wish it would work all the time.

—Chuck

Chuck can be found on Gearfetish.com as “Kuffed.”

He’s also been featured over at SeriousMaleBondage from time to time.

 

The Chair

The Chair — No dungeon should be without one
By Chuck

Metalbond gay male bondage 01I wish I had a dime for every time somebody asked me about The Chair. Heck, I’d maybe have a couple of dollars! They see the pics and imagine being strapped in it for a while. And having spent some (but not enough) time in it myself, I can say that it is a truly “refreshing” experience.
Metalbond gay male bondage 02The idea began after I built an electric chair for a Halloween display. That one was made from 2×4 scraps. Sure, it looked and worked OK, but it still looked like 2×4 scraps.
Metalbond gay male bondage 03So when I thought about spending a little more time on a chair for my dungeon, the first thing I did was to try to get away from the “lumber” look. I decided to use not 2x4s, but rather 2x3s for the material. I also stained it in a light color, so it looked more like an institutional finish and less like a waterbed frame.
Metalbond gay male bondage 04Also, I copied a slightly smaller chair’s dimensions so that the “condemned” would get a slight squeeze as he sat into it. There’s nothing like starting to feel confined even before the first strap is pulled into place.
Metalbond gay male bondage 05I’ve also made a few leather straps through the years, and early on I decided I wanted as much total immobilization as possible. This meant straps everywhere, including the neck, head and face. The final device for that proved to be a lucky combination. The head is held in place by straps on the top, sides, and chin. The 1.5-inch neck strap is very secure. Absolutely no head movement at all is possible, and the nose and forehead restraint make a perfectly light-tight blindfold as well.
Metalbond gay male bondage 06As you can see, several folks have enjoyed some time in The Chair. Hopefully there will be more to come.
Metalbond gay male bondage 07In the future, I plan on placing a few carriage bolts exposed on the seat, arms, legs and back, so that once the prisoner is tightly strapped in, his body will make contact with them. Then I can attach an electro box and make this a truly functioning electric chair. He’ll be firmly making contact to the bolts, and will be able to do nothing but sit there and enjoy (or not) the “treatment.”
And as they say, you can never have too many straps!

 

Metal would like to thank Chuck for sending in this information and the pictures. Chuck can be found on Gearfetish as Kuffed. He is Yossie’s collared pup, and he also stops over to see the fine folks at SeriousMaleBondage from time to time.

Chuck wants to use his flex cuffs on you

Check out these pictures from longtime Metalbond contributor Chuck:

Chuck flex cuffsChuck Flex cuffsFlex cuffs Halloween

Chuck says,

Halloween is coming up. I wanted to share my SWAT costume — everything is real except for the weapons, of course. The helmet-mounted LED light blinds my prisoners as I near them — a nice touch.

The riot cuffs are homemade from two wide white pull ties and a wide black one to hold them together — and trust me, they work quite well. Some are more open for legs, and some are smaller for wrists. I had a guy over once and used them to secure his hands behind his back while we showered together — now that was hot!

—Chuck

 

 

Thanks, Chuck! I hope you nab lots of prisoners on Halloween!