The Edge – Chapter 01

By Steellock

Matt looked at his squad mates. There was a look of awe and respect on their faces. In front of them was a guy hanging by thick, muscled arms from a beam across the ceiling of the cellar. His head was down on his chest, and sweat poured down his body.

TheEdge_1Around his wrists and hands were leather binders, secured by multiple straps and padlocks. The steel suspension rings on his palms were padlocked to the beam. Round his ankles were another set of straps, but they were not tied off and his feet were loose.

The bunched muscles of his back, from his neck to his lower rib cage, was shining red with occasional purple stripes. His butt, clenched and hard, shone in a similar colour. Red and purple stripes ran down the sides of his chest and thighs. The sweat shone in strong lighting, focused on him in an otherwise darkened room.

His balls hung low between his legs, held down by a steel band. They, too, were red and flushed. A chain was padlocked around his neck.

Continue reading The Edge – Chapter 01

Ice Lock pulley and cage setup for self-bondage

Hey prisoners,

When it comes to rigging yourself up in self-bondage, leave it to Richard Hunter of Mr S to show me how it’s done! Richard was kind enough to send the information and pictures below about using the Ice Lock in a most inventive manner.

Remember, whenever you do solo bondage play it’s a good idea to let a trusted friend know what you are up to so he can come and save your ass if something goes wrong.

—Metal

 

 

OK Metal,

I used the Ice Lock myself, the longer one and it lasted for 2 hours and 25 minutes with the Neoprene cosy on it. It was rigged to a pulley system with the keys attached to 2 padlocks to a cage. When the Ice Lock opened the weights (15 lbs.) at the end of the Ice Lock dropped to the floor bringing the other end of the rope thru 2 pulleys that held the keys with 2 lbs. of weight attached down to land in front of the cage. Plus lots of bondage inside the cage and the leg iron and handcuff keys were also attached onto the pulley system as well. Here are some pictures of the rigging, it’s pretty simple actually, just need two points of attachment in the ceiling about 5 feet apart for the two pulleys.

Metalbond_IMG_6853 Metalbond_IMG_6856 Metalbond_IMG_6858 Metalbond_IMG_6860 Metalbond_IMG_6862 Metalbond_IMG_6864 Metalbond_IMG_6865

The 15 lbs of weight are attached to the Ice Lock itself. On the other end is about 2 lbs. of weight with the keys. You need some weight to make sure the keys get pulled down when the Ice Lock opens and the 15 lbs drop off.

The 15 lbs and the Ice Lock is about 5 feet in front of the cage, so you can’t reach it. The keys then are about 1 foot in front of the cage when they drop down, and you can just reach thru the bars, even with the handcuffs on, and grab the keys to everything: the leg irons, handcuffs and the 2 padlocks locking the cage itself.

You’re in the cage for about 2 and a half hours, with no way out. Plus you can bring all your favorite toys in there with you or on the floor next to the cage to play with while locked up. Sweet, and yes, I did this to myself, to see how it all would work before I tried it on someone else. Gotta do the “research” you know!

It worked like a charm. You just gotta get the distances right as to the keys dropping down in front of the cage. Too far away and you can’t reach them if your hands are cuffed together. Also at first I didn’t put any weight on the key end of the rope, and then it dawned on me, wait, what’s going to cause it to drop down when the heavier weights drop off? So I figured 2 lbs would work and it did. Also had to make sure the rope ‘length’ was right, so it would drop all the way down. See, research is really important.

— Richard

 

Metalbond would like to thank Richard Hunter of Mr S for the pictures and information about the Ice Locks.  

Mikeintightpants checks in

Handcuff expert Mikeintightpants sent these pictures.

MetalbondNYC_gay_male_bondage_handcuffs_01 MetalbondNYC_gay_male_bondage_handcuffs_02

 

The first picture shows Mikeintightpants wearing 15 pairs of S&W model 100 cuffs.

 

The second picture is a trio of cuffs from his collection by Bonowi of Germany: hinged, 2-link chain, and 4-link chain models. Mikeintightpants says he would be particularly interested to hear from anybody else who has the 4-link chain model.

 

Thanks, Mikeintightpants, for checking in!

 

To see more from this guy, click here and here